10004425 | Zebra 6.63" x 6" Z-Slip Packing List Shipping Label (Case) - 3" Core, Direct Thermal, Matte, Polypropylene - Packing List Label for Outbound Cartons
Zebra Z-Slip is a packing list label: the packing slip prints on an industrial Zebra printer, then peels and applies to the outside of the carton in one motion. 10004425 is the 6.63" x 6" size, a direct thermal paper and polypropylene combination on a 3 in. core with 8 in. rolls.
For a shipping line, the change is fewer touches per order. Packers stop printing a sheet, folding it and stuffing it into the box or a sleeve, and receiving teams can read the contents without cutting the carton open. Zebra notes that the construction protects the printed side from chemicals and keeps the information secure.
Which Printers Take 10004425?
Z-Slip runs on Zebra industrial printers that hold a 3 in. core and an 8 in. roll. The Z-Slip listing names the Zebra ZT620 label printer, the Zebra ZT421 label printer, the ZT420, the 220Xi4 and the Zebra ZE500-6 print engine; Zebra's own Z-Slip material also names the 170Xi4. Desktop printers can't take an 8 in. roll.
Does Z-Slip Need a Ribbon?
No. Z-Slip is direct thermal, so the printer images it with heat alone. Run the printer in direct thermal mode and remove any ribbon before loading.
10004425 Features
- Labels per roll: 660
- Size: 6.63" x 6"
- Printable area: 3.5 x 6 in. on the 4.375 x 6.875 in. size (10006703); 5.625 x 5 in. on the 6.625 x 6 in. size (10004425)
- Facestock: white, smooth coated direct thermal paper, 5.9 mil
- Adhesive: all-temperature acrylic, 0.9 mil
- Liner: clear polypropylene, 2.1 mil (8.9 mil total)
- Core: 3 in.; roll: 8 in. outside diameter
- Sold by: Case
- Rolls per case: 2
- Perforation: Perforation between Labels
Where Z-Slip Fits
- E-commerce and B2B order fulfillment, printing the packing list at the pack station alongside the shipping label
- 3PL multi-client operations, where each client's packing list has to stay with the right carton
- Distribution centers working to cut pick, pack and ship errors and keep the packing list matched to its order
- Outbound cartons that carry invoices or certificates of conformance alongside the goods
Most packing lists come from the ERP or WMS. With automated label printing, the Z-Slip prints from the same order record as the shipping label, with no retyping at the pack station.
Z-Slip vs. a Printed Packing Slip in the Box
A conventional packing slip is printed on a sheet, folded and placed inside the carton or in a sleeve on the outside. Z-Slip prints and applies in one step. In Zebra's timing, an average Z-Slip print-and-apply took 11 seconds against 40 seconds for a traditional packing slip; Zebra puts that at about 8 labor hours a day for a center shipping 1,000 packages. Results depend on the operation.
Before You Order
- Minimum application temperature: 23°F
- Service temperature: -20°F to 131°F
- Storage: 72°F at 50% relative humidity
- Not recommended for outdoor use
- Z-Slip is made on 3 in. cores only; there is no 1 in. core version for desktop printers
Planning a Packing List Rollout?
Changing how a shipping line handles packing lists touches the printer, the label format and the system that prints it. Talk to an expert, request a quote, ask about corporate and project pricing, or see custom thermal labels for pre-printed shipping stock.
Product Family
Z-Slip
MFG Part Number
10004425
Product Type
Label
Print Method
Direct Thermal
Label Width
6.63"
Label Height
6"
Core Size
3" Core
Color
White
Labels Per Roll
660
Format
Roll
Finish
Matte
Labels Across
1
Adhesive
Permanent
Perforation
Perforation between Labels
Outside Diameter
8" OD
Material
Polypropylene
Coated Side
Coated Side Out (CSO)
Sold By
Case
Case Quantity
2
Case Weight
20
Compatible Printers
ZE500-6, 220Xi4, ZT620, ZT421, ZT420
Application
Shipping | Receiving
Zebra Z-Slip Spec Sheet.pdf
https://www.advanced-automationinc.com/content/product_downloads/zebra/Zebra Z-Slip Spec Sheet.pdf
null
null
null
null
null
null
null
null