10000299 | Zebra Z-Perform 2000T Topcoated Thermal Transfer Paper Label
Zebra Z-Perform 2000T is a smooth, topcoated paper label for thermal transfer printing, with a 0.5 mil permanent acrylic adhesive on a 40 lb. semi-bleached kraft liner. Zebra rates it for print speeds up to 14 inches per second and lists package labeling on corrugate, plastic, and metal, compliance labeling, food labeling, and work-in-process labeling as its applications.
Choose Zebra 10000299 when labels are applied at 30°F (-1°C) or warmer and used indoors. Zebra's Z-Perform 2000T All-Temp material uses a different adhesive that applies down to -20°F, for labeling inside freezers. For labels exposed to alcohol, bleach, oils, or solvents, choose a different material: Zebra rates 2000T "Not Recommended" for all of them.
Key Features & Business Benefits
- Rated to 14 ips: Zebra recommends 2000T for print speeds up to 14 inches per second, so it suits high-throughput industrial print lines.
- Ribbon-matched print quality: Zebra's suggested ribbons are its 6000, 2000, and 6100, which makes ribbon selection straightforward.
- Wide service range: Applied labels hold from -65°F to 200°F (-54°C to 93°C), covering cold storage through warm processing areas.
- Aggressive bond: On some surfaces Zebra tested, the adhesive bonds so strongly that the facestock rips before it releases.
- Food packaging compliance: Meets FDA 175.105 requirements for indirect food contact.
- Fanfold-ready topcoat: Zebra notes the topcoating is suitable for fanfolding.
Technical Specifications
- Material: Z-Perform 2000T
- SKU: 10000299
- Print Method: Thermal transfer
- Facestock: White smooth topcoated paper, 2.5 mil
- Adhesive: Permanent acrylic-based, 0.5 mil
- Liner: 40 lb. semi-bleached kraft stock, 3.0 mil
- Total Thickness: 6.0 mil ±10%
- Maximum Recommended Print Speed: 14 ips
- Minimum Application Temperature: 30°F (-1°C)
- Service Temperature: -65°F to 200°F (-54°C to 93°C)
- Optimal Storage: 72°F (22°C) at 50% RH
- Outdoor Use: Not recommended
- Suggested Ribbons: Zebra 6000, 2000, 6100
- Alcohol, Ammonia, Bleach, IPA: Not recommended with any suggested ribbon
- Gasoline, Grease, Oil: Not recommended with any suggested ribbon
- Acetone, IR Reflow, MEK, TCE, Xylene: Not recommended with any suggested ribbon
- Compliance: FDA 175.105 (indirect food contact)
Applications & Use Cases
- Corrugate, plastic, and metal packaging: The permanent acrylic adhesive covers all three package surfaces Zebra lists.
- Compliance labeling: Thermal transfer printing at up to 14 ips supports high-volume shipping and compliance label runs.
- Food labeling: FDA 175.105 compliance supports labels on food packaging with indirect contact.
- Work-in-process: The -65°F to 200°F service range covers parts that move between cold and warm production areas.
Compatible Accessories & Ordering
- Zebra 6000 ribbon: Suggested ribbon for Z-Perform 2000T.
- Zebra 2000 ribbon: Suggested ribbon for Z-Perform 2000T.
- Zebra 6100 ribbon: Suggested ribbon for Z-Perform 2000T.
- Ordering note: Size, core, perforation, and labels per roll vary by Z-Perform 2000T SKU. Confirm the exact SKU fits your printer's media width and core before ordering.
Related Products
FAQ
Which ribbon should I use with Z-Perform 2000T?
Use a Zebra 6000, 2000, or 6100 ribbon. These are the three ribbons Zebra suggests for this material.
Can I apply Z-Perform 2000T labels in a freezer?
No. Apply them at 30°F (-1°C) or warmer. Zebra's Z-Perform 2000T All-Temp material applies down to -20°F.
How fast can I print on Z-Perform 2000T?
Up to 14 inches per second. That is Zebra's recommended maximum for this material.
Will Z-Perform 2000T survive cleaning with alcohol or bleach?
No. Zebra rates alcohol, ammonia, bleach, and IPA as not recommended with all three suggested ribbons.
Is Z-Perform 2000T approved for food packaging?
Yes, for indirect food contact. The material meets FDA 175.105.
Can I use these labels outdoors?
No. Zebra does not recommend Z-Perform 2000T for outdoor use.
Product Family
Z-Perform 2000T
MFG Part Number
10000299
Product Type
Label
Print Method
Thermal Transfer
Label Width
4"
Label Height
6"
Color
White
Labels Per Roll
2,000
Format
Fanfold
Finish
Matte
Labels Across
1
Adhesive
Permanent Acrylic
Perforation
Perforation between Labels
Outside Diameter
Fanfold
Material
Top-Coated Paper
Coated Side
Coated Side Out (CSO)
Sold By
Case
Case Quantity
2
Case Weight
26
Compatible Printers
ZE500-6, ZE500-4, ZT620, ZT610, ZT510, ZT421, ZT420, ZT411, ZT410, ZT230, ZT220
Zebra Z-Perform 2000T Spec Sheet.pdf
https://www.advanced-automationinc.com/content/product_downloads/zebra/Zebra Z-Perform 2000T Spec Sheet.pdf
Zebra REACH Declaration for Labels.pdf
https://www.advanced-automationinc.com/content/product_downloads/zebra/Zebra REACH Declaration for Labels.pdf
Zebra REACH Declaration.pdf
https://www.advanced-automationinc.com/content/product_downloads/zebra/Zebra REACH Declaration.pdf
Zebra ROHS Declaration of Conformity.pdf
https://www.advanced-automationinc.com/content/product_downloads/zebra/Zebra ROHS Declaration of Conformity.pdf
null
null
