UCC-128 Labels for Retail Suppliers: GS1-128 Labels That Match Your ASN

SSCC Labels, Routing-Guide Templates & Print Quality that Hold Up at the Retailer’s DC.

THE SHORT ANSWER

A UCC-128 label, now called a GS1-128 label, is the shipping label big-box retailers expect on every carton and pallet. Its one mandatory element is an 18-digit SSCC, and that number must match the SSCC in your advance ship notice (EDI 856). A label that scans but doesn’t match the ASN still fails at the DC.

  • The SSCC is the Point

    One 18-digit number per carton or pallet, generated in one place and matched to the ASN.

  • One Template Per Retailer

    Driven by your order data, so a new routing guide is a template update, not a rebuild.

  • Proof When a Deduction Arrives

    Print records and verifier reports show which SSCC went on which carton, and how well it printed.

RECOGNIZE

Signs Your UCC-128 Labels Are Costing You Money

  • Deductions coded to labels, ASNs, or routing-guide violations show up on every remittance, and nobody can tell which cartons caused them.

  • Your cartons scan fine on your own dock, but the retailer’s DC says the SSCCs don’t match your ASN.

  • You keep a separate UCC-128 label file for every retailer, and a new routing guide means rebuilding them by hand.

  • Your ASN goes out when the order is picked, not when the truck is loaded, so short-ships never make it onto the 856.

  • Your 3PL prints your pallet labels, and you find out they were wrong when the deduction arrives.

Do You Need This

FEEL THE COST

What Retail Chargebacks Really Cost

What gets replaced: labels typed into a spreadsheet or a free online generator, one label file per retailer per SKU, SSCCs assigned by hand, an ASN built from the pick ticket instead of what actually loaded, and the hours each week someone spends matching deductions to shipments. Retailers recover the cost of those errors as retail chargebacks, also called vendor chargebacks or deductions, taken straight off your remittance.

MODELED EXAMPLE

A supplier ships 60,000 cartons a year to three retailers

  • $2,700labeling deductions: 1.5% of cartons at $3.00 each
  • $9,000ASN mismatches: three shipments a month at $250 each
  • $5,965six hours a week researching and disputing deductions
  • ≈$17,700modeled total a year, before freight, relabeling, or a refused load

Assume 1.5% of cartons draw a labeling deduction at $3.00 each; substitute the rate in your own routing guide: $2,700. Assume three ASN-mismatch shipments a month at $250 each: $9,000. Assume six hours a week researching and disputing deductions at $19.12 an hour, the U.S. median wage for shipping, receiving, and inventory clerks (Bureau of Labor Statistics, May 2023): $5,965. Modeled total: about $17,700 a year, before freight, relabeling, or a refused load.

RUN IT ON YOUR OWN OPERATION(cartons shipped × share drawing a label deduction × fee per carton) + (ASN-mismatch shipments × penalty per shipment) + (hours a week on deductions × hourly wage × 52)

  • Notice Where the Money Goes

    The per-carton fee is the smallest line. Mismatched data and the labor of chasing it are most of the bill, and printing a sharper barcode fixes neither.

  • Why It Lands on You

    Under the GS1 Logistic Label standard, responsibility for the correctness of everything on a logistic label rests with the shipper. When a retailer’s DC rejects a carton, it is checking your data against your ASN.

  • What to Measure First

    Pull 90 days of remittances and total every deduction coded to labels, ASNs, or receiving. That number is the ceiling on what fixing this is worth.

UNDERSTAND

How Compliant GS1-128 Labeling Works

  1. 01

    One Template per Retailer, Driven by Data

    Instead of a file for every retailer and SKU, each retailer gets one template that pulls ship-to, PO, store or DC number, item, count, and SSCC from your order data. A new routing guide becomes a template update, not a rebuild.

  2. 02

    The SSCC Is Born in One Place

    GS1 recommends generating SSCCs from your WMS or ERP, under your own GS1 Company Prefix, and archiving every one you create. The label reads that number. If the label system assigns it instead, the SSCC must be written back to the system that builds the ASN before the ASN is sent. Two systems numbering the same carton is how labels and ASNs drift apart.

  3. 03

    Labels Print at Pack-Out, and the ASN Follows What Loaded

    The label prints when the carton is closed or the pallet is wrapped, by scan-to-print or print-and-apply. GS1 recommends scanning only loaded pallets and sending the ASN at staging or loading, so the 856 describes the truck rather than the pick ticket.

  4. 04

    Print Quality Is Measured, Not Assumed

    A barcode verifier grades a sample of labels on a schedule, and each print leaves a record of which SSCC went on which carton. When a deduction arrives, you answer it with data instead of a guess.

CHOOSE

Which Labeling Approach Fits Your Operation

Most suppliers don’t need more software first. They need the label, the ASN, and the print quality to agree. Size the fix to three things: how many retailers’ formats you print, whether labels have to print themselves at pack-out, and who else prints labels on your behalf. You don’t need to pick software first. Tell us which retailers you ship to, who prints your labels today, and where your SSCC comes from, and Advanced Automation scopes the complete solution: software where you need it, printers, labels, and verification.

What this doesn’t cover: sending the ASN itself and disputing deductions. Your EDI connection transmits the 856, and disputes stay between you and your retailer. This page covers everything that has to be true on the carton.

Keep What Works

Your EDI provider or WMS already prints GS1-128 labels from the same data it sends in the ASN, and deductions are rare.

WHAT TO CHECK

You probably don’t need new label software. Check three things: the label and the ASN come from one record; the SSCC uses your own GS1 Company Prefix (GS1 calls SSCCs generated from a cloud provider’s prefix an incorrect use of the standard); and your labels still scan cleanly after a day in a trailer. If all three hold, put the money into print quality.

WHAT YOU’LL NEED

Thermal-transfer printers, 4 × 6 shipping labels and ribbon, and a barcode verifier. → Industrial printers · Labels · Ribbon

One or Two Retailers

One person prints labels for one or two retailers from a spreadsheet or ERP export.

LOOK FOR

Label software with a GS1-128 function that builds the application identifiers for you, SSCC serial numbers with the check digit calculated automatically, a counter that never repeats a number, and one template per retailer driven by data fields.

CHECK BEFORE YOU BUY

Before you start, ask whether any retailer will want RFID in the next year; if so, start with software that can encode it.

WHAT YOU’LL NEED

A desktop or industrial thermal-transfer printer at the packing station, and 4 × 6 labels and ribbon. → Desktop printers · Industrial printers · Labels

Automatic at Pack-Out

Labels must print automatically at pack-out, from ERP, WMS, or EDI data, for several retailers.

LOOK FOR

Printing that fires on a business event (a file, a database record, or an API call) with no one keying data; an SSCC written back to the system that builds the ASN before the ASN is sent; and a print record kept as long as a retailer can take a deduction.

CHECK BEFORE YOU BUY

Some label software keeps reprint history for only days, so plan to keep the print and SSCC record in your ERP or WMS.

WHAT YOU’LL NEED

Industrial printers on each pack line, print-and-apply where volume calls for it, and rugged scanners at the dock to confirm what loaded. → Industrial printers · Print-and-apply · Rugged scanners

3PL or Co-Packer

A 3PL or co-packer ships on your behalf.

WHAT TO CHECK

Check that your partner prints from your approved template and your data, through a browser or cloud account, and that the print record stays with you. Put the label requirement in the 3PL agreement, not in an email.

WHAT YOU’LL NEED

Printers and label stock at the partner’s site that meet the same spec as yours. → Industrial printers · Labels

Amazon Transparency

Amazon requires Transparency codes on your items.

LOOK FOR

Label software that requests codes from Amazon and prints them automatically, rather than codes managed from downloaded lists someone matches to SKUs by hand.

WHAT YOU’LL NEED

Item labels and a printer where products are packed. → Desktop printers · Labels

Retailer RFID

A retailer has added RFID tagging to your category.

WHAT TO CHECK

This is no longer only a labeling decision. Check for software that encodes RFID, a printer that encodes the inlay your retailer specifies, and tags tested on your product and packaging before the first shipment. We test tags remotely with demo equipment and sample tags, or on site when the project requires it.

WHAT YOU’LL NEED

An RFID printer and RFID labels with the specified inlay. → RFID printers · Labels

On the Floor

The hardware and supplies on the floor.

GS1 GUIDANCE

GS1 sizes most logistic labels at 4 × 6 inches when the label carries the SSCC and little else, and 6 × 8 inches when it carries item data. GS1 also advises against thermal stock that darkens with heat or sunlight, which matters for pallets that sit in a trailer or a yard; thermal-transfer printing with wax-resin or resin ribbon avoids it. Direct thermal is fine for cartons that move quickly indoors. For pallets, GS1 places the barcode 16 to 32 inches above the base and recommends the same label on two sides.

WHAT YOU’LL NEED

Industrial thermal-transfer printers, print-and-apply systems[CONFIRM: print-and-apply], 4 × 6 and 6 × 8 shipping labels, wax-resin and resin ribbon, barcode verifiers[CONFIRM: barcode verifiers], and rugged scanners for the dock. → Industrial printers · Print-and-apply · Labels · Ribbon · Verifiers · Rugged scanners

Tell us how you ship.

Which retailers, who prints your labels today, and where your SSCC comes from. Advanced Automation scopes the complete solution for your operation and returns a quote, including a straight answer on whether you need software at all.

Get My Labels Right[CONFIRM: Get My Labels Right form URL]

BELIEVE

What It Looks Like in Practice

A Consumer Tools Manufacturer Lifts Its Amazon Transparency Success Rate to 98%

A consumer tools manufacturer selling on Amazon under the Transparency program needed a 90% code success rate to keep the buy box. Pulling codes and matching them to SKUs was manual work, and its success rate sat right at that 90% floor. After its label software was connected directly to Amazon’s Transparency service, so codes printed on each label without the manual matching, its success rate rose to 98%.

  • 90%success rate needed to keep the buy box
  • At the Floorwhere it sat, with codes matched by hand
  • 98%after codes printed straight from Amazon’s service

TRUST

What Advanced Automation Delivers

Advanced Automation delivers the complete UCC-128 labeling solution: label software where you need it, labels and ribbon, printers and scanners, and the rollout. It starts when you reach out. We scope your operation retailer by retailer and take the project from there. Deploy it yourself, or have us help with site surveys, testing, implementation, and ongoing training, project by project.

  • Scoping

    A routing-guide inventory by retailer; where your SSCC comes from and whose prefix it uses; who prints labels today; and which labels are drawing deductions. Your GS1 Company Prefix comes from GS1 US; we build against it, we don’t license it.

  • Labels and Printing

    One data-driven template per retailer, label stock and ribbon sized to each routing guide, printers at each pack station, print-and-apply where volume calls for it[CONFIRM: print-and-apply], and verification of live labels against each routing guide at go-live. Our Custom Labels team produces pre-printed or specialty labels a retailer requires.

  • RFID, Where a Retailer Requires It

    RFID printers and labels, with tags tested on your product remotely using demo equipment and sample tags, or on site.

  • Rollout

    Timing depends on scope. Most projects go live within 2 to 4 weeks of sign-off. Larger scopes, such as many retailers, a 3PL printing on your behalf, or print-and-apply lines, can run longer. Collecting current routing guides is usually the slowest step.

  • Support After Go-Live

    Printer repair, parts, maintenance, and ongoing label and ribbon supply stay with Advanced Automation. Application questions go straight to the software’s own support team, so you never wait on a go-between. We don’t file chargeback disputes; we give you the print records and verification reports that make those conversations short. → Service and Repair · Supplies Management

RESOLVE DOUBTS

UCC-128 and GS1-128 Label FAQ

What Is an SSCC Label, and What Does a UCC-128 Label Have to Contain?

An SSCC label is a shipping label that carries a Serial Shipping Container Code: an 18-digit number, often called SSCC-18, that identifies one carton or pallet. Under the GS1 Logistic Label standard the SSCC is the only mandatory element, encoded with application identifier (00) in the lowest barcode on the label. Ship-to, PO, store or DC number, item GTIN, and count are added because the retailer’s routing guide requires them. UCC-128 is the older name for the GS1-128 barcode.

Do We Need Our Own GS1 Company Prefix to Make SSCC Labels?

Yes. GS1 says the company that builds the logistic unit should assign the SSCC from its own GS1 Company Prefix. It also says that when a cloud service generates SSCCs from the provider’s own prefix, traceability weakens and the standard is being used incorrectly. In the United States, prefixes are licensed by GS1 US.

Why Do We Get Chargebacks When Our Labels Scan Fine?

Because a readable barcode and a correct one are different things. Most label deductions come from data: an SSCC on the carton that isn’t in the ASN, an ASN built from the pick ticket rather than what loaded, or a field the routing guide requires that the template leaves out. Fix where the SSCC is generated and when the ASN is sent before you buy anything.

Our EDI Provider Prints Our UCC-128 Labels. Do We Need Label Software?

Maybe not. If the provider prints GS1-128 labels from the same data it transmits in the ASN, and your deductions are low, keep it. Label software earns its place when labels must print at pack-out without anyone keying data, when several retailers need different layouts from one data source, or when a 3PL prints on your behalf.

Where Does the Label Go on a Pallet and on a Carton?

GS1 places the pallet barcode 16 to 32 inches above the base, at least 2 inches from any vertical edge, and recommends the same label on two sides. On cartons, the target for the bottom of the barcode is 1.25 inches above the natural base, at least 0.75 inch from a vertical edge. Barcodes on logistic units run horizontally, in picket-fence orientation. Your routing guide may add requirements.

Can We Reuse SSCC Numbers?

No. Each SSCC identifies one logistic unit. Walmart’s supplier documentation says pallets shipped from a supplier to a retailer should carry an SSCC and that pallet IDs should not be reused for at least one year. Duplicates usually come from a counter that resets or from two systems numbering the same pallet.

How Do We Prove a Label Was Right When We Dispute a Deduction?

Keep three things: a record of which SSCC printed on which carton and when, the ASN you sent, and a verifier report showing print grade on a sample from that run. Store the print record where it will still exist when the dispute arrives, usually your ERP or WMS, because some label software keeps reprint history for only days.

What Does UCC-128 Compliance Labeling Cost?

Every business is unique, so each solution is scoped and quoted to the operation’s needs. Sometimes the right answer is printers, labels, and a verifier rather than software. Tell us how you ship and we’ll scope yours.

GET STARTED

Stop Paying for Label Errors

Get your labels right. Advanced Automation scopes the complete solution for your operation and returns a quote, with an implementation range and a straight answer on whether you need software at all.

TELL US

  1. 1Which retailers you ship to
  2. 2Who prints your labels today
  3. 3Where your SSCC comes from
Get My Labels Right[CONFIRM: Get My Labels Right form URL]

OR REQUEST A LABEL AND ASN AUDIT

Send three labels from a recent shipment, the ASN that went with them, and 90 days of deductions. The audit checks SSCC structure and check digits, compares each label to its ASN, grades print quality on the physical samples, and shows where the deductions are coming from.

Request an Audit[CONFIRM: Request an Audit URL]

PREFER TO CALL?

1-800-728-8889

Talk it through with a specialist.

WHERE THIS SHOWS UP

Where UCC-128 compliance labeling shows up:

  • Food & Beverage ManufacturingWalmart requires its food suppliers to share lot or batch codes, date codes, and where the lot code was generated, aligned to FSMA 204 traceability. Those fields have to be on the case and in the data.
  • ManufacturingManufacturers selling into big-box, home-improvement, and farm-and-ranch retail, each customer with its own routing guide.
  • Warehousing & DistributionDistributors shipping mixed pallets to retailer DCs, where every pallet needs its own SSCC and a matching ASN.
  • Third-Party Logistics3PLs printing labels and SSCCs for their clients, often for several brands at once.