THT-103-767-10 Brady  Label - Image1

Brady 1" x 0.25" High Temperature ESD Polyimide Circuit Board Label - THT-103-767-10

Part #:
THT-103-767-10
Product Description
Brady, THT-103-767-10, Label, 1" W, 0.25" H, Thermal Transfer, 3" Core, 10000 Labels per Roll, White
Supply Chain Constraints
Avoid Rising Prices & Long Delays >> Learn More

Quantity Discounts

See Pricing

Save 20%

and receive item sooner

Show Me How

Huge Inventory / Fast Shipping

Easy 30 Day Return Policy

Secured Transaction

Discover the
Advanced Automation Difference!

Description

THT-103-767-10 | Brady 1" x 0.25" B-767 ESD Polyimide ESD Polyimide Circuit Board Label (Roll of 10000 Labels) - 3 in. Core, Thermal Transfer - Static Dissipative PCB Labels

Labeling a static-sensitive board adds one more material to the ESD-protected area, and THT-103-767-10 is built for that job: a 1" x 0.25" Brady B-767 label in glossy white polyimide whose permanent acrylic adhesive is static dissipative, with surface resistivity in the 10^4 to 10^11 ohm range ANSI/ESD S541 defines for dissipative packaging materials. Brady measured 3.9 x 10^8 ohms/sq. Each roll sits on a 3 in. core sized for Brady's industrial thermal transfer printers.

For electronics manufacturers that control static from the work surface to the shipping bag, B-767 lets the serial number travel with the board through assembly, wash and test without adding a non-dissipative material to the assembly. Advanced Automation pairs these static dissipative labels with the printer, ribbon and labeling software that keep that identification consistent across lines and sites.

What B-767 Holds Up To

  • Short-term heat: no visible effect after 80 seconds at 626°F (330°C), 5 minutes at 500°F (260°C) and 2 hours at 392°F (200°C)
  • Long-term heat: still functional after 1,000 hours at 293°F (145°C), with moderate discoloration
  • Cold: 1,000 hours at -112°F (-80°C) with no visible change
  • Board washes: designed to withstand multiple harsh-condition PCB wash cycles
  • Solvents: meets MIL-STD-202G Method 215K with R6300 or R6000 Halogen Free ribbon
  • Electrical: 12,000 volt dielectric strength

The single -94°F to 212°F (-70°C to 100°C) range that appears in some B-767 listings understates the data sheet. Brady reports its results as averages, so confirm the label in your own process.

Printers That Run THT-103-767-10

Ribbon Choice Sets the Ratings

Brady's UL 969 Recognized Component listing for B-767 (UL file MH17154) and its MIL-STD-202G solvent result apply when the label is printed with Brady Series R6300 or R6000 Halogen Free. R6300 comes in printer-specific versions: plain R6300 series for the i7100, IP-R6300 series for the i5100 and IP printers, and i75-R6300 series for the i7500, each in widths matched to the label. For non-reflow boards cleaned in aqueous wash, Brady also lists R4900A and R8965. Find the width for this part in Brady ribbons or with the Ribbon Finder.

THT-103-767-10 Details

  • Labels per roll: 10,000
  • Material: Brady B-767 glossy white polyimide
  • Adhesive: static dissipative permanent acrylic
  • Thickness: 0.0024 in. topcoat and film plus 0.0017 in. adhesive, 0.0041 in. total without liner
  • Core: 3 in.
  • Print method: thermal transfer
  • Indoor use
  • Sold by: Roll of 10000 Labels

B-767, B-768 or B-797?

All three are glossy white Brady polyimides with the same heat results and the same ribbon options, so the choice comes down to static control and thickness. B-797 has a standard adhesive. B-767 adds the static dissipative adhesive at the same 0.0041 in. total thickness. B-768 is the low-profile ESD version at 0.0031 in., for boards where label height matters. If your ESD program covers every material that touches the board, B-767 or B-768 is the right starting point. Compare sizes in Brady high temp polyimide labels.

Check Before Ordering

  • Wave solder: Brady's data sheet makes no wave solder claim for B-767; if the label will contact the solder wave, test it in your process first.
  • Outdoor use: Brady does not recommend B-767 outdoors.
  • Ribbon width: match the ribbon to the label's liner width.

Building an ESD-Controlled Labeling Process?

From choosing between B-767 and B-768 to setting printer and ribbon defaults for a whole plant, an Advanced Automation expert can help you standardize. Recurring roll orders can run through corporate and project pricing.

Detailed Specs

MFG Part Number
THT-103-767-10
Product Type
Label
Print Method
Thermal Transfer
Label Width
1"
Label Height
0.25"
Core Size
3" Core
Color
White
Labels Per Roll
10,000
Format
Roll
Finish
Gloss
Labels Across
1
Adhesive
Permanent Acrylic
Material
Polyimide
Sold By
Roll of 10000 Labels
Compatible Printers
A8500, BBP12, BBP81, i5100, i6100, i7100, i7500, IP Series, PR Plus, THT 3" Core Printers
Application
Circuit Board Labeling, Component and Equipment Labeling
null
null
null
null
null
null
null
null
null
null

Downloads

Reviews

The Brady THT-103-767-10 is also known as BRA -THT10376710 or THT10376710