30 Years of Service
Huge Inventory / Fast Shipping
Easy 30 Day Return Policy
Secured Transaction
Labeling a static-sensitive board adds one more material to the ESD-protected area, and THT-12-767-10 is built for that job: a 0.5" x 0.437" Brady B-767 label in glossy white polyimide whose permanent acrylic adhesive is static dissipative, with surface resistivity in the 10^4 to 10^11 ohm range ANSI/ESD S541 defines for dissipative packaging materials. Brady measured 3.9 x 10^8 ohms/sq. Each roll sits on a 3 in. core sized for Brady's industrial thermal transfer printers.
For electronics manufacturers that control static from the work surface to the shipping bag, B-767 lets the serial number travel with the board through assembly, wash and test without adding a non-dissipative material to the assembly. Advanced Automation pairs these static dissipative labels with the printer, ribbon and labeling software that keep that identification consistent across lines and sites.
The single -94°F to 212°F (-70°C to 100°C) range that appears in some B-767 listings understates the data sheet. Brady reports its results as averages, so confirm the label in your own process.
Brady's UL 969 Recognized Component listing for B-767 (UL file MH17154) and its MIL-STD-202G solvent result apply when the label is printed with Brady Series R6300 or R6000 Halogen Free. R6300 comes in printer-specific versions: plain R6300 series for the i7100, IP-R6300 series for the i5100 and IP printers, and i75-R6300 series for the i7500, each in widths matched to the label. For non-reflow boards cleaned in aqueous wash, Brady also lists R4900A and R8965. Find the width for this part in Brady ribbons or with the Ribbon Finder.
All three are glossy white Brady polyimides with the same heat results and the same ribbon options, so the choice comes down to static control and thickness. B-797 has a standard adhesive. B-767 adds the static dissipative adhesive at the same 0.0041 in. total thickness. B-768 is the low-profile ESD version at 0.0031 in., for boards where label height matters. If your ESD program covers every material that touches the board, B-767 or B-768 is the right starting point. Compare sizes in Brady high temp polyimide labels.
From choosing between B-767 and B-768 to setting printer and ribbon defaults for a whole plant, an Advanced Automation expert can help you standardize. Recurring roll orders can run through corporate and project pricing.
Ideal for PCB and electronic component manufacturing, these labels are static dissipative and survive extreme processes like wave soldering and multiple harsh washes.
| Part Number | THT-12-767-10 |
| Product Number | 176318 |
| UPC | 888434622094 |
| UOM | Roll of 10000 Labels |
| Brand Name | Brady |
| Adhesive Type | Static Dissipative Permanent Acrylic |
| After Process | Yes, this material will work with this application |
| Application | Circuit Board Labeling, Component and Equipment Labeling |
| Approval/Compliance (EMEA) | UL Recognised, ANSI/ESD S541-2008 (between 10 and 10 ohms) for dissipative ESD packaging materials, MIL-STD-202 Method 215K |
| Average Outdoor Durability | Not Recommended |
| Board Application | Through Hole Technology - Top, Through Hole Technology - Bottom, Surface Mount Technology (SMT) - Top/Bottom, After Process, Static Dissipative |
| Brady Material Number | B-767 |
| Color | White |
| Compatible Surface Types | High Surface Energy |
| Continuous or Die-cut | Die-cut |
| Core Diameter (imperial) | 3 in |
| Core Diameter (metric) | 76.20 mm |
| Corner Type | Rounded |
| Dimensions (imperial) | 0.437 in H x 0.5 in W |
| Dimensions (metric) | 12,70 mm (W) x 11,10 mm (H) |
| Enables Industry Compliance (North America) | ASTM B 117, UL 969, ASTM D 1000, ANSI/ESD S541-2008, ASTM D 2979, MIL-STD-202G, Method 215K Resistance to Solvents, MIL-STD-202G, UL Recognized, ASTM G 155 |
| Finish | Gloss |
| Format | IP Enabled |
| Height (imperial) | 0.437 in |
| Height (metric) | 11.10 mm |
| Horizontal Repeat (imperial) | 0.662 in |
| Horizontal Repeat (metric) | 16.81 mm |
| Indoor or Outdoor Use | Indoor Use |
| Industry | Aerospace, Automotive, Electronics, Manufacturing |
| Industry Compliance MIL_STD | MIL-STD-202G, Method 215K |
| Industry Compliance UL | UL969 |
| Label Properties | Heat Resistant, Permanent Adhesive, Electrostatic Dissipative |
| Label/Tape Size (imperial) | 0.437 in H x 0.5 in W |
| Label/Tape Size (metric) | 11.10 mm H x 12.70 mm W |
| Material | Static Dissipative Polyimide |
| Material Properties | Harsh Flux Wash-resistant |
| Material Type | Polyimide |
| Maximum Service Temperature (°C) | 300 °C |
| Maximum Service Temperature (°F) | 572 °F |
| Minimum Service Temperature (°C) | -80 °C |
| Minimum Service Temperature (°F) | -112 °F |
| Performance Characteristics | Abrasion resistance, High heat resistance, Low temperature resistance, Solvent/Chemical resistance, Electrostatic dissipative |
| Primary Noun, Basic Function.1 | Label |
| Print Technology | Thermal Transfer |
| Printer Compatibility | BBP12, BBP81, A8500, i5100, i6100, i7100, i7500, PR Plus, IP Series, THT 3 in Core Printers |
| Printer and Label Applications | Circuit Board, General Identification |
| Printer supply or Pre-printed | Printer supply |
| Quantity per Roll | 10000 |
| Quantity per Row | 5 |
| Recommended Ribbon | i75-R6302, IP-R6302, R6302 |
| Recommended Ribbon Series | R6300 |
| Resistance Properties | Abrasion-resistant, Chemical-resistant, Fluid-resistant, High Temperature-resistant, Humidity-resistant, Low Temperature-resistant |
| Ribbon Series | R6300 |
| SAP B-Number | B-767 |
| SAP Local Description | THT-12-767-10, WHT, 0.50 IN x 0.437 IN |
| Service Temperature Range (°C) | -80 °C - 300 °C |
| Service Temperature Range (°F) | -112 °F - 572 °F |
| Shape | Rectangle |
| Smart Cell | No |
| Surface Mount Technology SMT | Yes, this material will work with this application |
| Thickness (imperial) | 4.1 mil |
| Thickness (metric) | 0.104 mm |
| Through Hole Technology | Top: Yes, Bottom: Yes |
| Total Quantity | 10000 |
| Trade Name | UltraTemp |
| Vertical Repeat (imperial) | 0.537 in |
| Vertical Repeat (metric) | 13.64 mm |
| Web Width (imperial) | 3.35 in |
| Web Width (metric) | 85.09 mm |
| Width (imperial) | 0.5 in |
| Width (metric) | 12.70 mm |
| EU RoHS Compliance | Pass 2011/65/EU(Pass 2015/863) |
| EU RoHS Compliant | Yes |
