Huge Inventory / Fast Shipping
Brady 0.25" x 0.25" High Temperature ESD Polyimide Circuit Board Label - THT-70-767-20
- Part #:
- THT-70-767-20
30 Years of Service
Labeling a static-sensitive board adds one more material to the ESD-protected area, and THT-70-767-20 is built for that job: a 0.25" x 0.25" Brady B-767 label in glossy white polyimide whose permanent acrylic adhesive is static dissipative, with surface resistivity in the 10^4 to 10^11 ohm range ANSI/ESD S541 defines for dissipative packaging materials. Brady measured 3.9 x 10^8 ohms/sq. Each roll sits on a 3 in. core sized for Brady's industrial thermal transfer printers.
For electronics manufacturers that control static from the work surface to the shipping bag, B-767 lets the serial number travel with the board through assembly, wash and test without adding a non-dissipative material to the assembly. Advanced Automation pairs these static dissipative labels with the printer, ribbon and labeling software that keep that identification consistent across lines and sites.
The single -94°F to 212°F (-70°C to 100°C) range that appears in some B-767 listings understates the data sheet. Brady reports its results as averages, so confirm the label in your own process.
Brady's UL 969 Recognized Component listing for B-767 (UL file MH17154) and its MIL-STD-202G solvent result apply when the label is printed with Brady Series R6300 or R6000 Halogen Free. R6300 comes in printer-specific versions: plain R6300 series for the i7100, IP-R6300 series for the i5100 and IP printers, and i75-R6300 series for the i7500, each in widths matched to the label. For non-reflow boards cleaned in aqueous wash, Brady also lists R4900A and R8965. Find the width for this part in Brady ribbons or with the Ribbon Finder.
All three are glossy white Brady polyimides with the same heat results and the same ribbon options, so the choice comes down to static control and thickness. B-797 has a standard adhesive. B-767 adds the static dissipative adhesive at the same 0.0041 in. total thickness. B-768 is the low-profile ESD version at 0.0031 in., for boards where label height matters. If your ESD program covers every material that touches the board, B-767 or B-768 is the right starting point. Compare sizes in Brady high temp polyimide labels.
From choosing between B-767 and B-768 to setting printer and ribbon defaults for a whole plant, an Advanced Automation expert can help you standardize. Recurring roll orders can run through corporate and project pricing.